|
Fiber Optics Test Equipment: Diagnosis Needed
Testing for continuity, checking signal loss and troubleshooting
problems these are the reasons why a fiber optics test equipment
is here for. After a cable set-up, installation, connection and
termination has been made, fiber optic testing is in order. One has
to check whether everything every parameter for a fully functional
and operational fiber optic system is within specifications.
A fiber optics test equipment is made to test for different
parameters and factors. As important as having the right tools and
fully functional at that, is the necessity of knowing how to use
these. It is thus advised that before going to the field for actual
work, one must check every fiber optics test equipment he will be
using, making sure these are working well and properly calibrated.
Before one goes out to the field, it is important that one have the
cable layouts to have a guide on what needs testing. One also needs
to record results of the test data gathered. This documentation is
important so that there will be records for reference and for
tracing back if it would be necessary.
Some of the commonly used fiber optics test equipments are:
Fiber Optic Tracer
This fiber optics test equipment is used to check for continuity and
to trace a fibers path from one point to another. This type of
equipment has a LED source that mates to a fiber optics connector.
With a cable attached for testing, one needs to look at the other
end point to see if the light from LED source is transmitter through
the fiber. If one finds no light, check the intermediate connections
to determine the defective portion of the fiber optics cable. Also,
instead of a LED, tracers that are more powerful use a laser. The
breaks in fibers or the high loss connectors can easily be seen with
the obvious red laser light.
Fiber Optics Microscope
This is used to check the quality of the termination process on the
connectors. This allows one to do the inspection procedure from
several angles. Always be careful though when checking cables with
this microscope, making sure no power is present in it.
Fiber Optics Power Meter
This fiber optics test equipment measures power. The meter should be
set at the appropriate range before doing the test. Check if there
is enough power for the system. Having too much power overloads the
receiver, while having too little will make the receiver treat the
signal as noise.
Do you want all the necessary testing tools?
If you want a more complete set of tools or equipment for your fiber
optics testing job, then you may like having a fiber optics test
kit. One can choose from many brands out there. It is important that
you get high-quality tools to help you perform your fiber optics
testing efficiently, and do these the safest way.
Information Articles
|
